Using DVI2USB 3.0

The Epiphan DVI2USB 3.0 can be used to connect your computer  to the DVI, VGA or HDMI video output of the ultrasound system.

• Connect your computer to the video converter via the USB cable. The lighting of the red LED indicates proper connection between computers and video converter.
• After a few seconds, the LED turns blue or green flashing to indicate proper connection between computers and video converter.
• Connect the video converter to the ultrasound device via the VGA, DVI or HDMI cable.
• The blue or green LED will continue to flash until you start capturing a video signal.
• During the acquisition of a video signal, the LED must be green.

The Epiphan DVI2USB 3.0 supports resolution of up to 1920x1200 pixels. Performance may be limited by your computer features.

The Epiphan DVI2USB 3.0 supports both USB 3.0 and USB 2.0.

CAUTION: the video converter must be connected directly to a USB port on your computer. Do not use hubs or the USB socket on the external keyboard.  Use USB 3.0 to maximize performances.

Epiphan drivers

If you are going to use this Epiphan video converter, please download and install the Epiphan drivers.

We suggest the following Epiphan driver versions:

* technical support is no longer supported from Epiphan Systems Inc.

For more information about video converter Epiphan's DVI2USB 3.0, please see the manufacturer's instruction.